Difference between revisions of "10.1 inch Diagonal-1280x800 IPS HDMI/VGA/AV Display-CQR0476"
(→Display) |
|||
| Line 1: | Line 1: | ||
| − | [[File: | + | [[File:CQRZ-0143-1.jpg|thumb|300px|right|DMX Shield for Arduino]] |
==Introduction== | ==Introduction== | ||
Revision as of 08:58, 27 January 2018
File:CQRZ-0143-1.jpg
DMX Shield for Arduino
Introduction
This 10.1 inch high-resolution 1280 * 800 IPS display is especially designed as a monitor for Raspberry Pi and other mini PC. The HDMI/VGA/AV interfaces ensure its wide compatibility. Making a digital photo frame, playing a video, adding a face for your robot, you can expand your imagination, make more fun.
Features
- Specially designed for Arduino master device.
- Can very easily access the Arduino device to DMX512 network.
- Do not need to buy expensive equipment for loading protocol change.
- Equipped with high-quality NEUTRIK 3-pin plug.
- Ensure a reliable connection with other music devices. @CQRobot
Specification
| Parameter | Value |
|---|---|
| Screen Size: | 10.1 inch |
| Screen Dimensions: | 217 mm * 135mm / 8.54 inches * 5.31 inches (16 : 10) |
| Display Dimensions: | 230 mm * 150 mm * 5.2mm / 9.05 inches * 5.9 inches * - 0.2 inches |
| Panel Type: | a-Si TFT-LCD Panel |
| Resolution (RGB): | 1280 * 800, WXGA |
| Display Mode: | HFFS, Normally Black, Transmissive |
| Surface: | Hard Coating |
| Brightness: | 350 cd/m^2 |
| Contrast Ratio: | 800 : 1 (Min.) |
| Input Voltage: | 7.5V to 12 V |
| Rated Power: | 6 W to 7W |
| Signal Input: | AV + VGA + HDMI (HDMI 1.2) |
| Weight: | 344g |
NOTE
Kit does not contain power parts, buyers need their own configuration.
Display
File:CQRZ-0143-1.jpg 300px |
File:CQRZ-0143-2.jpg 300px |
File:CQRZ-0143-3.jpg 300px |
File:CQRZ-0143-4.jpg 300px |
File:CQRZ-0143-5.jpg 300px |
File:CQRZ-0143-6.jpg 300px |
DOCUMENTS
Shopping from DFRobot Store or DFRobot Distributor.
