10.1 inch Diagonal-1280x800 IPS HDMI/VGA/AV Display-CQR0476

File:CQRZ-0143-1.jpg

DMX Shield for Arduino

Introduction

This 10.1 inch high-resolution 1280 * 800 IPS display is especially designed as a monitor for Raspberry Pi and other mini PC. The HDMI/VGA/AV interfaces ensure its wide compatibility. Making a digital photo frame, playing a video, adding a face for your robot, you can expand your imagination, make more fun.

Features

• Specially designed for Arduino master device.
• Can very easily access the Arduino device to DMX512 network.
• Do not need to buy expensive equipment for loading protocol change.
• Equipped with high-quality NEUTRIK 3-pin plug.
• Ensure a reliable connection with other music devices. @CQRobot

Specification

Parameter	Value
Screen Size:	10.1 inch
Screen Dimensions:	217 mm * 135mm / 8.54 inches * 5.31 inches (16 : 10)
Display Dimensions:	230 mm * 150 mm * 5.2mm / 9.05 inches * 5.9 inches * - 0.2 inches
Panel Type:	a-Si TFT-LCD Panel
Resolution (RGB):	1280 * 800, WXGA
Display Mode:	HFFS, Normally Black, Transmissive
Surface:	Hard Coating
Brightness:	350 cd/m^2
Contrast Ratio:	800 : 1 (Min.)
Input Voltage:	7.5V to 12 V
Rated Power:	6 W to 7W
Signal Input:	AV + VGA + HDMI (HDMI 1.2)
Weight:	344g

---

NOTE

Kit does not contain power parts, buyers need their own configuration.

Display

File:CQRZ-0143-1.jpg 300px

File:CQRZ-0143-2.jpg 300px

File:CQRZ-0143-3.jpg 300px

File:CQRZ-0143-4.jpg 300px

File:CQRZ-0143-5.jpg 300px

File:CQRZ-0143-6.jpg 300px

Outlinedrawing

300px

SHIPPING LIST

• 1 * HDMI+VGA+2AV LCD Controller Board
• 1 * 10.1 inch 1280 * 800 IPS LCD Panel
• 1 * LVDS Cable
• 1 * Keyboard with Wire

DOCUMENTS

• Installation Instruction V1.1
  
• Installation Instruction
  

Shopping from DFRobot Store