Difference between revisions of "Hall Sensor SKU: PZSHED0001"
(→Specifications) |
(→Pin Description) |
||
| Line 4: | Line 4: | ||
'''Note:It's a omnipolar magnet dectector so that it can not tell two polarities apart.''' | '''Note:It's a omnipolar magnet dectector so that it can not tell two polarities apart.''' | ||
| + | ---- | ||
| + | =='''Specifications'''== | ||
| + | *Working Voltage: 3.3V to 5V | ||
| + | *Output Signal: usually output low level, output high level when magnetism is detected (at the same time the onboard LED is on) | ||
| + | *Product Size: 30mm * 22.0mm | ||
| + | *Fixing Hole Size: 3mm | ||
---- | ---- | ||
=='''Pin Description'''== | =='''Pin Description'''== | ||
---- | ---- | ||
Revision as of 12:31, 12 January 2022
Description
The magnetic sensor based on the Hall induction principle can be used to detect magnetic materials (magnets), regardless of polarity, and the range can reach about 3cm (the detection range is related to the strength of magnetism). It has the advantages of being sensitive to magnetic field, simple structure, small size, wide frequency response, large output voltage change and long service life.
Note:It's a omnipolar magnet dectector so that it can not tell two polarities apart.
Specifications
- Working Voltage: 3.3V to 5V
- Output Signal: usually output low level, output high level when magnetism is detected (at the same time the onboard LED is on)
- Product Size: 30mm * 22.0mm
- Fixing Hole Size: 3mm
