PAJ7620U2 Gesture Recognition Sensor SKU: CQRSENSS001

From CQRobot-Wiki
Revision as of 14:51, 19 January 2022 by Chenqi (talk | contribs) (→‎Raspberry Pi Application)
Jump to: navigation, search
PAJ7620U2 Sensor

Description

I am a gesture recognition module based on PAJ7620U2, which can directly recognize 9 basic gestures, supports I2C interface, and is compatible with 3.3V/5V level. Compared with APDS-9960 and other solutions, I have faster recognition speed, higher accuracy, more gesture recognition, and stronger anti-interference, which is suitable for low-power application scenarios such as smart home and robot interaction.

Specificationn

3D Gesture Sensor Specifications

  • Operating Voltage: 3.3V/5V
  • Communication Interface: I2C
  • Recognition Distance: 5cm to 15cm
  • Supported Gestures: up, down, left, right, forward, backward, clockwise, anticlockwise, shake.
  • Recognition Rate: 240Hz
  • Recognition Angle: 60 Degree (diagonal)
  • Ambient Light Immunity: Less Than 100k Lux
  • Dimensions: 23.14mm * 27.76mm
  • Mounting Hole Size: 3.0mm

Ocean Interface Cable Specifications

  • Cable specifications: 22AWG
  • Material: Silicone
  • Withstand Voltage: Less Than 50V
  • Withstand Current: Less Than 1000MA
  • Length: 21cm
  • Line Sequence: Black-Negative Power Supply, Red-Positive Power Supply, Green-SDA, Blue-SDA, Yellow-INT.
CQRPAJ7620U2-A-2.jpg

DataSheet

Media: PAJ7620U2 General Datasheet.pdf

Raspberry Pi Application

  • Insert the Micro SD card of Raspberry Pi to host PC.
  • Copy the Rapberry Pi folder to boot directory of the micro SD card.
  • Start your Raspberry Pi with the Micro SD card
  • You can find that the Raspberry Pi codes are saved in the BOOT directory.

CQRSENSS001-1.jpg

  • Copy the folder to home directory
sudo cp -r /boot/RaspberryPi/ ./
sudo chmod 777 -R RaspberryPi/
cd RaspberryPi
Retrieved from "http://www.cqrobot.wiki/index.php?title=PAJ7620U2_Gesture_Recognition_Sensor_SKU:_CQRSENSS001&oldid=3826"